Back
E-LINE
Product Preparation
NEPh E-Line in its various product varieties as the
product for Wasted Waters, the product for Garbage and Composting or the one
for Hydrocarbons and solvents, is a mixture of
bacteria, enzymes, co-enzymes, holygomineral liquids, natural mending elements
that are:
·
Able to transform complex
organic substances in simpler ones thanks to activation of humic agent
s and biocatalysts which have a positive effect on
decomposing and transforming organic substances.
·
Capable of accelerating the
oxidation process and the deodorization of wastewaters in treatment plants in a
natural and non toxic way by restabilizing the biomass responsible for
purification, thus optimizing the BOD and the COD at the treatment plant
outlet.
·
Allowing easing and increasing
the humic activity promoting the balance between the creation of humus and its
mineralization, therefore the product is a strong biodegradator, which mends,
balances and speeds up the biomass.
Use: Composting garbage dumps, rejection of
mills and cellars, residues of slaug
hterhouses, etc.
Treatment
of wastewaters from public or private water-treatment plants, sewers of
buildings, septic sumps, public or private sewage, disencrusting and
deodorization of pipes.
Treatment
of grounds polluted by hydrocarbons and their by-products.
Treatment
of waste waters output of industrial processes. Washings of hydrocarbon
cisterns and reservoirs.
Method
of use (*): 1. Dilute bags 1 and 2 in 10 liters (aprox 2 gallons) of
tepid water at 35 ° to 40 °C (95 to 104 °F) and mix the
solution strongly. Let the mixture rest for 1 hour.
2.
Prepare a clean container filled with 400 in 600 liters (88 to 132
gallons) of clean water.
3.
Pour the preparation you obtained into the container and add
the product 3, the one in the bottle, (starter), mixing everything. Product is
ready.
4.
Distribute evenly
the mixture on the areas to be treated or vaporize it on the walls of
hydrocarbons cisterns or reservoirs, or pour everything into the inlet duct of
the water treatment plant or directly in the septic tank, or distribute
uniformly the mixture onto the surface of the organic substance to be treated
in layers of 20 cm to 180 cm (8 to 70 inches) at most.
If it is
sprayed under pressure it is important that pressure not to exceed 1,5 ATM, as
a strong pressure will damage the bacteria.
If not
all the prepared product is used it may be kept for 24 hours protecting it from
extreme cold or high temperature without losing its efficiency
Effects: Conservation
of the environment - Purification of ponds and waterways contaminated by
hydrocarbons and their by-products - Conservation of zones and grounds
contaminated by hydrocarbons and their by-products - Restoration of biologic
activity.
Quantity: A
pack of product is needed for 100 m3 of organic substance or for the
equivalent of 1000 inhabitants in water-treatment plants or for containers
having a surface of 1000 m2 or for 10 000 m2 of grounds
to be treated or for 100 m3 of organic substance or for degrading 30
kg of hydrocarbons.
Environmental impact: The product has no negative
effect on the environment given that it is of purely biological nature. The
reaction of the product can be considered neutral.
(*) In
the case of demonstrations, if not all the content of the package is needed it
is important to remember that the minimum dosage to be used is ¼ of each
component of the box. In particular the bag 1 needs to be mixed accurately to
assure the presence of all the families of bacteria.
It is also fundamental that
the unused product to be sealed carefully as the air humidity will wake up the
bacteria that having no food will perish in very few hours.